Displaying MLD cache information

About this task

Use this procedure to display the learned multicast groups in the cache.

Procedure

Enter Privileged EXEC mode:

enable
Display the learned multicast groups in the cache:

show ipv6 mld cache

Example

Switch:1#show ipv6 mld cache
==========================================================================================
                             MLD Cache Information

==========================================================================================
==========================================================================================
 GRPADDRESS/LASTREPORTER                  INTERFACE EXPIRATION
------------------------------------------------------------------------------------------
 ff03:0:0:0:0:0:0:0/                      Vlan10    0 day(s), 00h:04m:12s
 fe80:0:0:0:200:9aff:fe68:3dd5

1 out of 1 entries displayed

Job Aid

The following table describes the column headings in the command output for show ipv6 mld cache.

Variable	Description
GRPADDR	Indicates the IPv6 address of the multicast address of interest.
LASTREPORTER	Indicates the IPv6 address of the last reporter.
INTERFACE	Indicates the ingress interface for MLDv2.