Deleting a dynamically learned route

About this task

Delete a dynamically learned route from the routing table if you do not want the switch to use the route. Exercise caution when you delete entries from the routing table.

Procedure

Enter Global Configuration mode:

enable

configure terminal
View IP route information:

show ip route [<A.B.C.D>] [-s default|-s <A.B.C.D/X>] [alternative] [count-summary] [spbm-nh-as-mac][preference] [vrf WORD<0-16>] [vrfids WORD<0-512>] [static]
Delete the dynamically learned route:

no ip route <A.B.C.D> <A.B.C.D> <A.B.C.D> dynamic

Example

Delete a dynamically learned route:

Switch:1>enable
Switch:1#configure terminal
Switch:1(config)#no ip route 192.0.2.32 255.255.255.0 198.51.100.31 dynamic

Variable definitions

Use the data in the following table to use the show ip route commands.

Table 1. Variable definitions
Variable	Value
<A.B.C.D>	Specifies the IP address of the route to the network.
alternative	Displays the alternative routes.
count-summary	Displays a summary of the number of routes learned from each routing protocol for each VRF.
preference	Displays the route preference.
-s <A.B.C.D/X>	Indicates the IP address and subnet mask for which to display routes.
-s default	Indicates the default subnet.
static	Displays the static route information.
vrf `WORD<0-16>`	Displays the route for a particular VRF.
vrfids `WORD<0-512>`	Displays the route for a particular VRF number.
spbm-nh-as-mac	Displays the spbm route next hop as mac.

Use the data in the following table to use the no ip route command.

Table 2. Variable definitions
Variable	Value
<A.B.C.D> <A.B.C.D> <A.B.C.D>	Specifies the IP address, the subnet mask, and the next-hop IP address, respectively.
dynamic	Specifies that a dynamic route is to be deleted.
enable	Disables the route.
local-next-hop enable	Disables the local-next-hop option.
preference	Deletes the value of the route preference.
next-hop-vrf WORD<0-16>	Specifies the name of the next-hop VRF router.