Display RA Guard Configuration

About this task

Display configured RA Guard policy information.

Procedure

To enter User EXEC mode, log on to the switch.
Display configured RA Guard policy information:

show ipv6 fhs ra-guard policy WORD<1–64>

Example

Switch:1# show ipv6 fhs ra-guard policy
============================================================================================================
                                                  IPv6 Ra Guard Policy Info
============================================================================================================
                                                                                     MIN-HOP MAX-HOP MANAGED
POLICY-NAME    RA-SRC-ADDR-LIST  RA-MAC-ADDR-LIST  RA-PREFIX-LIST   LIMIT    LIMIT   CON-FLAG PREF
-------------------------------------------------------------------------------------------------------------
 Ra_guard_pol1    None              None               acl1           0        0         None            None
-------------------------------------------------------------------------------------------------------------
  
All 1 out of 1 Total Num of ra-guard policy entries displayed

Variable Definitions

The following table defines parameters for the show ipv6 fhs ra-guard policy command.


Variable	Description
`WORD<1–64>`	Displays the RA Guard policy for the specified policy-name. By default, all the configured RA Guard policies are displayed.

Job Aid

The following table shows the field descriptions for the show ipv6 fhs ra-guard policy command.


Field	Description
POL-NAME	Indicates the RA Guard policy name.
DEVICE-ROLE	Indicates if the device role is router or host.
IPv6–ACC-LIST	Indicates the IPv6 access list against which the incoming RA packet's source IPv6 address has to be validated.
MAC-ACC-LIST	Indicates the MAC access list against which the incoming RA packet's source MAC address has to be validated.
PREFIX-LIST	Specifies the IPv6 prefix list against which advertised prefix information in incoming RA packets source need to be validated.
MIN HOP-LIMIT	Indicates the advertised hop count minimum limit.
MAX HOP-LIMIT	Indicates the advertised hop count maximum limit.
MANAGED CONF-FLAG	Indicates the managed address configuration flag status in the advertised RA packet.
RTR-PREF	Indicates the advertised default router preference value.