Viewing I-SID maximum MAC-limit
Perform this procedure to view the maximum MAC learning limit information for an I-SID.
Important
The command show i-sid limit-fdb-learning is supported only on the VSP 4450 Series.
About this task
The total MAC learning limit per switch is 32000. MAC learning on I-SID stops when the maximum limit is reached.
Procedure
show i-sid limit-fdb-learning <1-16777215>
Example
View maximum MAC learning limit for all I-SIDs.
Switch:1#show i-sid limit-fdb-learning
=========================================
Isid MAC-Limit Info
=========================================
ISID MAC-LIMIT MAXMAC
ID STATUS COUNT
-----------------------------------------
10 disabled 32000
11 disabled 32000
12 disabled 32000
15 disabled 32000
101 disabled 32000
All 5 out of 5 Total Num of i-sid Info displayed
View maximum MAC learning limit for a specific I-SID.
Switch:1#show i-sid limit-fdb-learning 10
=========================================
Isid MAC-Limit Info
=========================================
ISID MAC-LIMIT MAXMAC
ID STATUS COUNT
-----------------------------------------
10 disabled 32000
All 1 out of 1 Total Num of i-sid Info displayed
Variable definitions
The following table defines parameters for the show i-sid limit-fdb-learning command.
Important
The command show i-sid limit-fdb-learning is supported only on the VSP 4450 Series.
|
Variable |
Value |
|---|---|
|
limit-fdb-learning |
Displays the I-SID-based maximum MAC limit information. |
|
<1–6777215> |
Displays the service interface identifier (ISID). The ISID range is 1 to 16777215. |
Job aid
The following table describes the fields in the output of the show i-sid limit-fdb-learning command.
Important
The command show i-sid limit-fdb-learning is supported only on the VSP 4450 Series.
|
Field |
Description |
|---|---|
|
ISID ID |
Specifies the service interface identifier (ISID) |
|
MAC-LIMIT STATUS |
Specifies whether the MAC learning limit is enabled or disabled |
|
MAXMAC COUNT |
Specifies the MAC learning limit |