SBT configuration

This configuration allows you to build a snooping binding table (SBT) which contains entries from only trusted devices or hosts. This SBT table is used to validate Neighbor Discovery (ND) packets. You can view, create, or delete the entries in the SBT.

Create an SBT Entry

About this task

Use this procedure to create an SBT entry.

Procedure

  1. In the navigation pane, expand Configuration > IPv6.
  2. Click FHS.
  3. Click the Snoop Binding tab.
  4. Click Insert.
  5. Configure the parameters for the snoop binding.
  6. Click Insert.
  7. Optional: Click Refresh to update the results.

Snoop Binding field descriptions

Use the data in the following table to use the Snoop Binding tab. A subset of these fields appear if click Insert.

Name

Description

VlanId

Specify the VLAN to which the snooped entry belongs.

Ipv6Address

Enter the IPv6 address assigned to the IPv6 host.

MacAddress

Enter the MAC address of the snooped entry.

InterfaceIndex

Specify the interface on which the entry is learnt.

EntryType

Indicates the type of entry - static (1) or dynamic (2).

EntrySource

Indicates the method entry was learnt from - static (1) or dhcp (2).

ValidTime

Indicates the valid time for the snooped entry.

TimeToExpiry

Indicates the time to expiry of the snooped entry.

View SBT Entries

About this task

Use this procedure to display a configured SBT table.

Procedure

  1. In the navigation pane, expand Configuration > IPv6.
  2. Click FHS.
  3. Click the Snoop Binding tab.

Snoop Binding field descriptions

Use the data in the following table to use the Snoop Binding tab. A subset of these fields appear if click Insert.

Name

Description

VlanId

Specify the VLAN to which the snooped entry belongs.

Ipv6Address

Enter the IPv6 address assigned to the IPv6 host.

MacAddress

Enter the MAC address of the snooped entry.

InterfaceIndex

Specify the interface on which the entry is learnt.

EntryType

Indicates the type of entry - static (1) or dynamic (2).

EntrySource

Indicates the method entry was learnt from - static (1) or dhcp (2).

ValidTime

Indicates the valid time for the snooped entry.

TimeToExpiry

Indicates the time to expiry of the snooped entry.

Delete an SBT Entry

About this task

Use this procedure to delete an entry from the SBT table.

Procedure

  1. In the navigation pane, expand Configuration > IPv6.
  2. Click FHS.
  3. Click the Snoop Binding tab.
  4. Select a row from the list to delete.
  5. Click Delete.