Display BFD Global Configuration

BFD for IPv6 interfaces is a demonstration feature on some products. For more information about feature support, see VOSS Feature Support Matrix.

About this task

Use this procedure to display global configuration information for BFD.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display global BFD configuration information:

    show ip bfd [vrf WORD<1-16>] [vrfids WORD<0-512>]

Example

The following example displays global configuration information for BFD on an IPv4 interface.

Switch:1>show ip bfd
================================================================================
                         BFD information - GlobalRouter
================================================================================
                      BFD Version :  1
                     Admin Status :  TRUE
                      Trap Enable :  FALSE
--------------------------------------------------------------------------------
   Total session number :  1

    UP: 1, DOWN: 0, AdminDown: 0, Init: 0
--------------------------------------------------------------------------------

Variable Definitions

The following table defines parameters for the show ip bfd command.

Table 1.

Variable

Value

vrf WORD<1-16>

Specifies a VRF instance by VRF name.

vrfids WORD<0-512>

Specifies a VRF or range of VRFs by ID.