Viewing Fabric Attach global configuration status

Use this procedure to display the Fabric Attach global configuration status on a switch.

Procedure

Enter Privileged EXEC mode:

enable
Display the FA configuration status using one of the following commands:
- show fa
- show fa agent

Example

Sample output for the show fa command:

Switch:1#show fa 

===============================================================
                          Fabric Attach Configuration
===============================================================
                            FA Service : enabled
                       FA Element Type : server
                 FA Assignment Timeout : 240
                  FA Discovery Timeout : 240
                     FA Provision Mode : spbm

Sample output for the show fa agent command:

Switch:1#show fa agent

================================================================================
                          Fabric Attach Configuration
================================================================================
                            FA Service : enabled
                       FA Element Type : server
                 FA Assignment Timeout : 240
                  FA Discovery Timeout : 240
                     FA Provision Mode : spbm