Displaying FHS IPv6 access list information

About this task

Displays the current FHS IPv6 access list information.

Procedure

Enter Privileged EXEC mode:

enable
Display the current FHS IPv6 access list information:

show ipv6 fhs ipv6-access-list [WORD<1–64>]

Example

Switch:1# show ipv6 fhs ipv6-access-list

================================================================================
                        IPv6 FHS Access List Table Info
================================================================================
                                                                MASK-RANGE
ACC-LIST-NAME       IPV6-PREFIX                             MASK FROM TO   MODE
--------------------------------------------------------------------------------
v6_acl1             1:0:0:0:0:0:0:1                         64   64   64   Allow
v6_acl2             1:0:0:0:0:0:0:1                         64   64   64   Allow
--------------------------------------------------------------------------------

All 2 out of 2 Total Num of ipv6 access list entries displayed

Job aid

The following table shows the field descriptions for the show ipv6 fhs ipv6-access-list command.


Field	Description
Access list name	Indicates the IPv6 access list name.
ipv6_prefix	Indicates the IPv6 prefix added to the IPv6 access list.
mask_len	Indicates prefix mask length added to the IPv6 access list.
mask_range_from	Indicates the IPv6 range start mask length.
mask_range_to	Indicates the IPv6 range end mask length.
mode	Indicates the access mode.