Configuring the forwarding database timeout globally

Use the following procedure to configure the aging time globally for the forwarding database.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Enter the following command:

    mac-address-table aging-time <10-1000000>

Variable definitions

Use the data in the following table to use the mac-address-table command.

Table 1. Variable definitions

Variable

Value

aging-time

Specifies the timeout period for dynamically learned mac addresses on the vlan. The default valus is 300.

<10–1000000>

Specifies the range for the aging time.
9036830-00 Rev AD