Power summary

Use the show sys power command to view a summary of the power information for the chassis.

The syntax for this command is as follows.

show sys power [global] [power-supply] [slot]

The following example shows sample command output.

Switch:1#show sys power

==========================================================================================
                           Chassis Power Information

==========================================================================================

Chassis Power Status: redundant

             Total     Required  Max
Chassis      Chassis   Redundant Allocated Available Reserved Required
Type         Power     Power     Power     Power     Power    Power
------------------------------------------------------------------------------------------
SwitchXYZ     4200      1400      1851      2349      1411     1851
------------------------------------------------------------------------------------------
Note

Note

Power information can differ by hardware platform. For more information, see the hardware documentation for your platform.