Viewing DvR summary

Use this procedure to view a summary of the DvR configuration on a DvR Controller or a DvR Leaf.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. View a summary of DvR configuration:

    show dvr

Example

View the information on a DvR Controller:

Switch:1#show dvr

==================================================================
                    DVR Summary Info 
==================================================================
Domain ID                      : 5
Domain ISID                    : 16678219
Backbone ISID                  : 16678216
Role                           : Controller
My SYS ID                      : 00:bb:00:00:81:21
Operational State              : Up
GW MAC                         : 00:00:5e:00:01:25
InjectDefaultRouteDisable(GRT) : Enabled

View the information on a DvR Leaf:

Switch2:1#show dvr

======================================================================
                          DVR Summary Info           
======================================================================
Domain ID                      : 5
Domain ISID                    : 16678219
Role                           : Leaf
My SYS ID                      : 00:bb:00:00:71:23
Operational State              : Up
GW MAC                         : 00:00:5e:00:01:25
Inband Mgmt Clip IP            : 72.54.44.1
Virtual Ist local address      : 51.51.51.1
Virtual Ist local subnet mask  : 255.255.255.0
Virtual Ist peer address       : 51.51.51.2
Virtual Ist cluster-id         : 255
Virtual Ist ISID               : 16677226

Job aid

Use the data in the following table to use the show dvr command output.

On a Controller:

Field

Descriptions

Domain ID

Specifies the domain ID of the DvR domain to which the Controller belongs.

Domain I-SID

Specifies the DvR domain I-SID.

The range is 16678217 to 16678727.

Backbone I-SID

Specifies the backbone I-SID.

The value is 16678216.

Role

Specifies the role of the node in the DvR domain, namely Controller.

My SYS ID

Specifies the MAC address of the Controller.

Operational State

Specifies the operational state of the Controller.

GW MAC

Specifies the gateway MAC address.

InjectDefaultRouteDisable

Specifies whether injection of default routes is disabled on the Controller. The default is disabled.

On a Leaf node:

Field

Descriptions

Domain ID

Specifies the domain ID of the DvR domain to which the Leaf node belongs.

Domain I-SID

Specifies the DvR domain I-SID.

The range is 16678217 to 16678727.

Role

Specifies the role of the node in the DvR domain, namely Leaf.

My SYS ID

Specifies the MAC address of the Leaf node.

Operational State

Specifies the operational state of the Leaf node.

GW MAC

Specifies the gateway MAC address.

Inband Mgmt Clip IP

Specifies the in-band management CLIP IP address.

Virtual Ist local address

Specifies the local IP address of the node, if vIST is configured.

Virtual Ist local subnet mask

Specifies the subnet mask of the local IP address of the node, if vIST is configured.

Virtual Ist peer address

Specifies the IP address of the peer node, in the vIST pair.

Virtual Ist cluster-id

Specifies the cluster ID if vIST is configured.

Virtual Ist ISID

Specifies the I-SID if vIST is configured.