IPv6 mroute interface

Use the show ipv6 mroute interface command to display the IPv6 mroute interface information. The syntax for this command is as follows.

show ipv6 mroute interface

Example

Switch:1(config)#show ipv6 mroute interface

============================================================
                        Mroute Interface - GlobalRouter

============================================================
INTERFACE   TTL       PROTOCOL
------------------------------------------------------------
VLAN 2      1         pimsm   
VLAN 7      1         pimsm   
VLAN 10     1         pimsm   
VLAN 20     1         pimsm   

4 out of 4 total mroute entries displayed

The following table shows the field descriptions for this command.

Table 1. show ipv6 mroute interface
Field	Description
INTERFACE	Displays the slot and port number or VLAN ID for this entry.
TTL	Displays the datagram time-to-live (TTL) threshold for the interface. IPv6 multicast datagrams with a TTL less than this threshold are not forwarded out of the interface. The default value of 0 means that all multicast packets are forwarded out of the interface.
PROTOCOL	Displays the protocol as one of the following: other(1): none of the following local(2): manually configured netmgmt(3): configured by a network management protocol pimSparseMode(8): PIM-SMv2 igmpOnly(10) pimSsmMode(11) spb