Variable definitions

The following table defines parameters for the show isis spbm ip-multicast-route command.

Variable

Value

all

Displays all IP Multicast over Fabric Connect route information.

detail

Displays detailed IP Multicast over Fabric Connect route information.

group{A.B.C.D}

Displays information on the group IP address for the IP Multicast over Fabric Connect route.

vlan<1-4059>

Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.

vrfWORD<1–16>

Displays IP Multicast over Fabric Connect route information by VRF.

vsn-isid<1–16777215>

Displays IP Multicast over Fabric Connect route information by I-SID.

The following table defines parameters for the show isis spb-mcast-summary command.

Variable

Value

count

Displays the total number of SPB multicast entries.

host-nameWORD<0–255>

Displays the IP Multicast over Fabric Connect summary information by host-name.

lspid<xxxx.xxxx.xxxx.xx-xx>

Displays the IP Multicast over Fabric Connect summary information by LSP ID.