Variable definitions

The following table defines parameters for the interface vlan command.

Variable

Value

<1-4059>

Specifies the VLAN ID.

The following table defines parameters for the interface GigabitEthernet command.

Variable

Value

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

The following table defines parameters for the ip address command.

Variable

Value

<A.B.C.D/X>

Specifies the address and mask.