Display Energy Efficient Ethernet (EEE) Statistics

About this task

Perform this procedure to display information about Energy Efficient Ethernet (EEE) statistics for all ports on a switch, or for a specific port.

Procedure

To enter User EXEC mode, log on to the switch.
Display information about all ports or specify a particular port:

show energy-saver eee statistics [{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}]

Example

Switch:1>show energy-saver eee statistics
==========================================================================================
                                EEE Port Status
==========================================================================================
         EEE           Tx          Tx              Rx           Rx
PortId   Status        LPI Events  Idle Duration   LPI Events   Idle Duration
                                   (micro seconds)              (micro seconds)
------------------------------------------------------------------------------------------
1/1      enabled       847         963657920       115          965100020

Variable Definitions

Use the data in following table to use the show energy-saver eee statistics command.


Variable	Value
{slot/port[/sub-port][-slot/port[/sub-port]][,...]}	Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.