ap-location

Configures an AP‘s deployment location based filter for this user-defined role

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

ap-location [any|contains|exact|not-contains]

ap-location any

ap-location [contains|exact|not-contains] <WORD>

Parameters

ap-location any


ap-location any	Specifies the AP location to match (in an RF Domain) or the AP‘s resident configuration any – Defines an AP‘s location as any

ap-location [contains|exact|not-contains] <WORD>


ap-location	Specifies the AP location to match (in an RF Domain) or the AP‘s resident configuration. Select one of the following filter options: contains, exact, or not-contains.
contains <WORD>	Applies role if the associating AP‘s location contains the location string specified in the role. <WORD> – Specify the location string to match.
exact <WORD>	Applies role if the associating AP‘s location exactly matches the string specified in the role. <WORD> – Specify the exact location string to match.
not-contains <WORD>	Applies role if the associating AP‘s location does not contain the location string specified in the role. <WORD> – Specify the location string. The role is applied if the location does not match the specified string.

Examples

nx9500-6C8809nx9500-6C8809(config-role-policy-test-user-role-testing)#ap-location contains office

nx9500-6C8809(config-role-policy-test-user-role-testing)#show context
 user-role testing precedence 10
  ap-location contains office
nx9500-6C8809(config-role-policy-test-user-role-testing)#

Related Commands


no	Removes an AP‘s deployment location string from this user-defined role