no (dns-whitelist-config-mode)

Removes a specified host or IP address from the DNS whitelist, and prevents it from accessing network resources

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

no permit <IPv4/IPv6/HOSTNAME>

no permit <IPv4/IPv6/HOSTNAME>


<IPv4/IPv6/HOSTNAME>	Removes a device from the DNS whitelist (identifies the device by its IP address or hostname) <IPv4/IPv6/HOSTNAME> – Specify the device‘s IPv4/IPv6 address or hostname.

nx9500-6C8809(config-dns-whitelist-test)#show context
dns-whitelist test
permit example_company.com suffix
nx9500-6C8809(config-dns-whitelist-test)#

nx9500-6C8809(config-dns-whitelist-test)#no permit example_company.com

nx9500-6C8809(config-dns-whitelist-test)#show context
dns-whitelist test
nx9500-6C8809(config-dns-whitelist-test)#