terminal

Sets the length and width of the CLI display window on a terminal

Note

This command and its syntax is common to both the User Executable and Privilege Executable configuration modes.

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

terminal [length|width] <0-512>

terminal [length|width] <0-512>


length <0-512>	Sets the number of lines displayed on a terminal window <0-512> – Specify a value from 0 - 512.
width <0-512>	Sets the width (the number of characters displayed) of the terminal window <0-512> – Specify a value from 0 - 512.

ap505-13403B#show terminal
Terminal Type: xterm
Length: 0     Width: 80
ap505-13403B#

ap505-13403B#terminal length 30

ap505-13403B#terminal width 100

ap505-13403B#show terminal
Terminal Type: xterm
Length: 30     Width: 100
ap505-13403B#


no	Resets the width or length of the terminal window
no	Resets the width or length of the terminal window