channel
(iot-device-type-imagotag-policy)
Manually configures the channel assigned
for the ESL communicator to tag communication in the 2.4 GHz band. Or, enables
ACS (Auto-Channel Selection)
mode.
Supported in the following platforms:
- Access Points: AP-8432
- Wireless Controllers: RFS 4000
- Service Platforms: NX 5500, NX 75XX, NX 95XX, NX 96XX
- Virtual Platforms: CX9000, VX 9000
Syntax
channel [<0-10>|acs]
Parameters
channel [<0-10>|acs]
| channel [<0-10>|acs] |
Configures the 2.4 GHz frequency channel, using one of
the following options:
- <0-10> – Manually configures the channel from 0 - 10.
- acs – Enables ACS channel selection mode. This is the default setting.
|
Examples
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#channel 9
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#show context
iot-device-type-imagotag-policy ImagoTagPolicy
channel 9
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#
