Ethernet ports (Eth0 and Eth1) automatically negotiate half- and
full-duplex connections with the connecting device.
Eth0 is 100/1000/2500
BASE-T
Eth1 is 10/100/1000
BASE-T
These ports are autosensing and adjust to straight-through and
crossover standard Cat5 or better Ethernet cables automatically. The access
point receives power through an Ethernet connection to the ETH0 port from
power sourcing equipment (PSE) that is compatible with the 802.3at and
802.3at standards.
One USB port
Use the USB port
to connect USB-based beacons such as iBeacon and Internet of Things (IoT)
devices.
One micro USB console port
You
can order a micro USB console adapter for the AP410C access point here.
One reset button
One security slot
Tip
The best practice
is to use Kensington® locks for locking the device.
Operating temperature: 0 °C to
+40 °C (+32 °F to +104 °F)
Storage temperature: −40 °C to
+70 °C (−40 °F to +158 °F)
