reconnect-attempts

Configures the maximum number of attempts made to re-establish a tunnel connection

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

reconnect-attempts <0-8>

Parameters

reconnect-attempts <0-8>


reconnect-attempts <0-8>	Configures the maximum number of attempts made to re-establish a tunnel connection <0-8> – Specify a value from 0 - 8 (default is 0: configures infinite reconnect attempts).

Examples

nx9500-6C8809(config-l2tpv3-policy-L2TPV3Policy1)#reconnect-attempts 8

nx9500-6C8809(config-l2tpv3-policy-L2TPV3Policy1)#show context
l2tpv3 policy L2TPV3Policy1
 hello-interval 200
 cookie-size 8
 reconnect-attempts 8
nx9500-6C8809(config-l2tpv3-policy-L2TPV3Policy1)#

Related Commands


no	Resets the maximum number of reconnect attempts to default (0: configures infinite reconnect attempts)