simultaneous-users

Specifies the number of users (client MAC addresses) that can simultaneously log on to the captive portal. This option is disabled by default.

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

simultaneous-users <1-8192>

Parameters

simultaneous-users <1-8192>


simultaneous-users <1-8192>	Specifies the number of MAC addresses that can simultaneously access the captive portal <1-8192> – Select a number from 1 - 8192.

Examples

nx9500-6C8809(config-captive-portal-test)#simultaneous-users 5

nx9500-6C8809(config-captive-portal-test)#show context
captive-portal test
 access-time 35
 custom-auth info bob bob@examplecompany.com
 connection-mode https
 inactivity-timeout 750
 server host 172.16.10.9
 simultaneous-users 5
nx9500-6C8809(config-captive-portal-test)#

Related Commands


no	Resets or disables captive portal commands