country-code
Configures a RF Domain's country of
operation. Since device channels transmit in specific channels unique to the country of
operation, it is essential to configure the country code correctly or risk using illegal
operation.
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
country-code <WORD>
Parameters
country-code <WORD>
| country-code |
Configures the RF Domain's country of operation |
| <WORD> |
Specify the two (2) letter ISO-3166 country code. |
Examples
nx9500-6C8809(config-rf-domain-default)#country-code ?
WORD The 2 letter ISO-3166 country code
ae United Arab Emirates
ag Antigua and Barbuda
ai Anguilla
al Albania
an Dutch Antilles
ar Argentina
at Austria
au Australia
ba Bosnia-Herzegovina
bb Barbados
bd Bangladesh
be Belgium
bf Burkina Faso
--More--
nx9500-6C8809(config-rf-domain-default)#
nx9500-6C8809(config-rf-domain-default)#country-code us
nx9500-6C8809(config-rf-domain-default)#show context
rf-domain default
contact Bob+14082778691
country-code us
channel-list 2.4GHz 1,2,3,4,5,6,7,8,9,10
control-vlan 1
nx9500-6C8809(config-rf-domain-default)#
