cdp
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Parameters
cdp [receive|transmit]
| receive |
Enables CDP
packet snooping on this interface. When enabled, the port receives periodic
interface updates from a multicast address. This option is enabled by
default. |
| transmit |
Enables CDP
packet transmission on this interface. When enabled, the port sends out
periodic interface updates to a multicast address to advertise its presence
to neighbors. This option is enabled by default. |
Example
nx9500-6C8809(config-profile-testnx5500-if-ge1)#cdp transmit
Related Commands
| no |
Disables CDP packet snooping on the controller or service platform‘s selected GE ports |
