ssid-match

Configures the SSID (and its character length) used as a match criteria

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

ssid-match [ssid|ssid-len]

ssid-match [ssid <SSID>|ssid-len <0-32>]

Parameters

ssid-match [ssid <SSID>|ssid-len <0-32>]


ssid <SSID>	Specifies the SSID match string <SSID> – Specify the SSID string. Note: Specify the correct SSID to ensure proper filtering.
ssid-len <0-32>	Specifies the length of the SSID <0-32> – Specify the SSID length from 0 - 32 characters.

Examples

nx9500-6C8809(config-test-signature-test)#ssid-match ssid PrinterLan

nx9500-6C8809(config-test-signature-test)#show context
 signature test
  bssid 11-22-33-44-55-66
  src-mac 00-1E-E5-EA-1D-60
  dst-mac 55-66-77-88-99-00
  frame-type beacon
  ssid-match ssid PrinterLan
  filter-ageout 8
  payload 1 pattern test offset 1
nx9500-6C8809(config-test-signature-test)#

Related Commands


no (wips-signature-config-mode-command)	Removes the configured SSID