refresh-time (dhcpv6-pool-config)
Configures this DHCPv6 pool‘s refresh time in seconds. This is the
interval between two successive DHCP pool refreshes. The DHCP refresh process refreshes IPv6
client information.
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
refresh-time <600-4294967295>
Parameters
refresh-time <600-4294967295>
| refresh-time <600-4294967295> |
Specify this DHCPv6 pool‘s refresh time from 600
-4294967295 seconds. |
Examples
nx9500-6C8809(config-dhcpv6-server-policy-test-pool-DHCPv6Pool1)#refresh-time 1000
nx9500-6C8809(config-dhcpv6-server-policy-test-pool-DHCPv6Pool1)#show context
dhcpv6-pool DHCPv6Pool1
network 2002::/64
refresh-time 1000
domain-name TechPubs
dns-server 2002::1
option DHCPv6Pool1Option 60
nx9500-6C8809(config-dhcpv6-server-policy-test-pool-DHCPv6Pool1)#
