mu-mimo

interface-config-radio-instance

Enables multi-user multiple input multiple output (MU-MIMO) support on the selected radio. When enabled, multiple users are able to simultaneously access the same channel using the spatial degrees of freedom offered by MIMO.

Supported in the following platforms:

Access Points — AP5010, AP310i/e, AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533

Syntax

mu-mimo

Parameters

None

Example

nx9500-6C8809(config-profile-TestAP510-if-radio1)#mu-mimo
nx9500-6C8809(config-profile-TestAP510-if-radio1)#show context include-factory | include mu-mimo
  mu-mimo
nx9500-6C8809(config-profile-TestAP510-if-radio1)#

ap510-80C2AC(config-device-84-24-8D-80-C2-AC-if-radio1)#mu-mimo

pa510-80C2AC(config-device-84-24-8D-80-C2-AC-if-radio1)#show context include-factory | include mu-mimo
  mu-mimo
ap510-80C2AC(config-device-84-24-8D-80-C2-AC-if-radio1)#

Related Commands


no (radio-interface-config-command)	Disables mu-mimo on the selected radio