no (iot-device-type-imagotag-policy)

Reverts this IoT Device-Type Imagotag policy settings to default values

Supported in the following platforms:

Access Points — AP-8432
Wireless Controllers — RFS 4000
Service Platforms — NX 5500, NX 75XX, NX 95XX, NX 96XX, VX 9000

Syntax

no [channel|enable|fcc-mode|output-power|payload-size|port|server|ssl|window-size]

Parameters

no <PARAMETERS>


no <PARAMETERS>	Reverts this IoT Device-Type Imagotag policy settings to default value

Examples

The following example shows the Imagotag policy settings before the no commands are executed:

NOC-NX9500(config-iot-device-type-imagotag-policy-test)#no ?
iot-device-type-imagotag-policy test
  enable
  output-power Level-B
  window-size 12
  payload-size 25
  ssl
  fcc-mode
  channel 9
  server ip-address 10.234.160.225
NOC-NX9500(config-iot-device-type-imagotag-policy-test)#

NOC-NX9500(config-iot-device-type-imagotag-policy-test)#no payload-size

NOC-NX9500(config-iot-device-type-imagotag-policy-test)#no window-size

NOC-NX9500(config-iot-device-type-imagotag-policy-test)#no server

The following example shows the Imagotag policy settings after the ‘no‘ commands are executed:

nx9500-6C8809(config-iot-device-type-imagotag-policy-test)#show context
 iot-device-type-imagotag-policy test
  enable
  output-power Level-B
  ssl-enable
  fcc-enable
  channel 9
nx9500-6C8809(config-iot-device-type-imagotag-policy-test)#