dfs-rehome

Reverts to configured home channel once the DFS (Dynamic Frequency Selection) evacuation period expires

Note

This option is applicable only if the radio‘s RF mode is set to ‘5GHz-wlan‘.

Supported in the following platforms:

Access Points — AP5010, AP310i/e, AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533

Syntax

dfs-rehome {holdtime <30-3600>}

Parameters

dfs-rehome {holdtime <30-3600>}


dfs-rehome {holdtime <30-3600>}	Enables the radio to revert to the configured home channel once the DFS evacuation period expires holdtime – Optional. Specifies the duration, in minutes, to stay in the new channel <30-3600> – Specify the holdtime from 30 - 3600 minutes. The default is 90 minutes.

Example

nx9500-6C8809(config-profile-510TestProfile-if-radio1)#dfs-rehome holdtime 500

nx9500-6C8809(config-profile-510TestProfile-if-radio1)#show context
 interface radio1
  dfs-rehome holdtime 500
nx9500-6C8809(config-profile-510TestProfile-if-radio1)#

Related Commands


no (radio-interface-config-command)	Stays on DFS elected channel after evacuation period expires