qos

Defines QoS (Quality of Service) settings on this Ethernet port

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

qos trust [802.1p|cos|dscp]

Parameters

qos trust [802.1p|cos|dscp]


trust [802.1p\|cos\|dscp]	Trusts QoS values ingressing on this interface 802.1p – Trusts 802.1p COS values ingressing on this interface cos – Trusts 802.1p COS values ingressing on this interface. This option is enabled by default. dscp – Trusts IP DSCP QOS values ingressing on this interface. This option is enabled by default.

Example

nx9500-6C8809(config-profile-testnx5500-if-ge1)#qos trust dscp

nx9500-6C8809(config-profile-testnx5500-if-ge1)#qos trust 802.1p

nx9500-6C8809(config-profile-testnx5500-if-ge1)#show context
 interface ge1
  description "This is GigabitEthernet interface for Royal King"
  duplex full
  dot1x supplicant username Bob password 0 test@123
  ip dhcp trust
  ip arp header-mismatch-validation
  qos trust dscp
  qos trust 802.1p
  channel-group 1
nx9500-6C8809(config-profile-testnx5500-if-ge1)#

Related Commands


no	Removes QoS settings on the selected interface