memberOf

Applies an Active Directory (AD) group filter to this user-defined role. A wireless client can be a member of more than one group within the AD database. This command applies a AD group based firewall, which applies a role to a wireless client only if it belongs to the specified AD group.

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

memberOf <AD-GROUP-NAME>

Parameters

memberOf <AD-GROUP-NAME>


memberOf <AD-GROUP-NAME>	Applies this user-defined role to a client only if the client belongs to the specified AD group <AD-GROUP-NAME> – Specify the AD group name.

Examples

nx9500-6C8809(config-role-policy-test-user-role-test)#memberOf ADTestgroup

nx9500-6C8809(config-role-policy-test-user-role-test)#show context
 user-role test precedence 1
  assign vlan 1
  assign rate-limit to-client 200
  memberOf ADTestgroup
nx9500-6C8809(config-role-policy-test-user-role-test)#

Related Commands


no	Removes the AD group assigned to this user-defined role