no (client-identity-config-mode)

Removes the DHCP options match criteria configurations

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

no [dhcp <1-16>|dhcp-match-message-type]

Parameters

no [dhcp <1-16>|dhcp-match-message-type]


dhcp <1-16>	Removes the DHCP option match criteria rule identified by the <1-16> keyword <1-16> – Specify the DHCP option match criteria rule index
dhcp-match-message-type	Removes the DHCP message type to match

Examples

The following example shows the client identity ‘test‘ settings before the ‘no‘ commands are executed:

nx9500-6C8809(config-client-identity-test)#show context
client-identity test
 dhcp 2 message-type discover option 2 exact hexstring 012456c22c44
 dhcp 1 message-type request option 60 exact ascii MSFT5.0
 dhcp-match-message-type all
nx9500-6C8809(config-client-identity-test)#

The following example shows the client identity ‘test‘ settings after the ‘no‘ commands are executed:

nx9500-6C8809(config-client-identity-test)#no dhcp 2

nx9500-6C8809(config-client-identity-test)#no dhcp-match-message-type

nx9500-6C8809(config-client-identity-test)#show context
client-identity test
 dhcp 1 message-type request option 60 exact ascii MSFT5.0
nx9500-6C8809(config-client-identity-test)#