passive

Configures specified OSPF interface as passive. This option is disabled by default.

A passive interface receives routing updates, but does not transmit them.

Supported in the following platforms:

Access Points — AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533

Syntax

passive [<WORD>|all|vlan <1-4094>]

Parameters

passive [<WORD>|all|vlan <1-4094>]


<WORD>	Enables the OSPF passive mode on the interface specified by the <WORD> parameter
all	Enables the OSPF passive mode on all the L3 interfaces
vlan <1-4094>	Enables the OSPF passive mode on the specified VLAN interface <1-4094> – Specify the VLAN interface ID from 1 - 4094.

Examples

nx9500-6C8809(config-profile default-ap8533-router-ospf)#passive vlan 1

nx9500-6C8809(config-profile default-ap8533-router-ospf)#show context
 router ospf
  ospf enable
  network 1.2.3.0/24 area 4.5.6.7
  area 0.0.0.4
  auto-cost reference-bandwidth 1
  default-information originate metric 1 metric-type 2
  passive vlan1
  ip default-gateway priority 1
nx9500-6C8809(config-profile default-ap8533-router-ospf)#

Related Commands


no (router-mode-config-command)	Disables the OSPF passive mode on a specified interface