ike-lifetime

Configures the IKE SA‘s key lifetime in seconds

The lifetime defines how long a connection (encryption/authentication keys) should last, from successful key negotiation to expiration. Two peers need not exactly agree on the lifetime, though if they do not, there is some clutter for a superseded connection on the peer defining the lifetime as longer.

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

ike-lifetime <600-86400>

Parameters

ike-lifetime <600-86400>


ike-lifetime <600-86400>	Sets the IKE SA‘s key lifetime in seconds <600-86400> – Specify a value fro m 600 - 86400 seconds. The default is 8600 seconds.

Example

nx9500-6C8809(config-profile-testAP8533-crypto-auto-ipsec-secure)#ike-lifetime 800

nx9500-6C8809(config-profile-testAP8533-crypto-auto-ipsec-secure)#show context crypto auto-ipsec-secure
  ike-lifetime 800
nx9500-6C8809(config-profile-testAP8533-crypto-auto-ipsec-secure)#