no (dhcpv4-class-config)

Removes this DHCP user class policy‘s settings

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

no [multiple-user-class|option]

no option user-class <VALUE>

Parameters

no <PARAMETERS>


no <PARAMETERS>	Disables multiple user class options on this DHCP user class policy

Examples

The following example shows the DHCP class settings before the ‘no‘ commands are executed:

nx9500-6C8809(config-dhcp-policy-test-class-dhcpclass1)#show context
 dhcp-class dhcpclass1
  option user-class test
  multiple-user-class
nx9500-6C8809(config-dhcp-policy-test-class-dhcpclass1)#

nx9500-6C8809(config-dhcp-policy-test-class-class1)#no multiple-user-class

nx9500-6C8809(config-dhcp-policy-test-class-dhcpclass1)#no option user-class test

The following example shows the DHCP class settings after the ‘no‘ commands are executed:

nx9500-6C8809(config-dhcp-policy-test-class-dhcpclass1)#show context
 dhcp-class dhcpclass1
nx9500-6C8809(config-dhcp-policy-test-class-dhcpclass1)#