file

Displays file system information

Note

This command is not available in the USER EXEC mode.

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

show file [information <FILE>|systems]

Parameters

show file [information <FILE>|systems]


information <FILE>	Displays file information <FILE> – Specify the file name.
systems	Lists all file systems present in the system

Examples

ap8432-070235#show file systems
File Systems:

      Size(Mb)      Free(Mb)  Use%    Type  Prefix
            64            62     3   flash  nvram:
            84            81     2   flash  flash:
           137            82    40       -  vmsdb:
ap8432-070235#

nx9500-6C8809#show file information startup-config
nvram:startup-config:
  type is configuration file
nx9500-6C8809#