radius
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
radius [nas-identifier|nas-port-id] <WORD>
Parameters
radius [nas-identifier|nas-port-id] <WORD>
| radius |
Configures RADIUS authentication parameters |
| nas-identifier <WORD> |
Specifies the RADIUS Network Access Server (NAS) identifier attribute used by this device
- <WORD> – Specifies the NAS identifier
|
| nas-port-id <WORD> |
Specifies the RADIUS NAS port ID attribute used by this device
- <WORD> – Specifies the NAS port ID
|
Example
nx9500-6C8809(config-profile-TestNX5500)#radius nas-port-id 1
nx9500-6C8809(config-profile-TestNX5500)#radius nas-identifier test
nx9500-6C8809(config-profile-TestNX5500)#show context
profile nx5500 TestNX5500
mint link ip 1.2.3.4
mint level 1 area-id 88
bridge vlan 1
bridging-mode isolated-tunnel
ip igmp snooping
ip igmp snooping querier
radius nas-identifier test
radius nas-port-id 1
neighbor-info-interval 6
neighbor-inactivity-timeout 500
--More--
nx9500-6C8809(config-profile-TestNX5500)#
Related Commands
| no |
Disables or reverts settings to their default |
