use

Enables device categorization on this WIPS policy. This command uses an existing device categorization list. The list categorizes devices as authorized or unauthorized.

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

use device-categorization <DEVICE-CATEGORIZATION>

Parameters

use device-categorization <DEVICE-CATEGORIZATION>


device-categorization <DEVICE-CATEGORIZATION>	Associates a device categorization list <DEVICE-CATEGORIZATION> – Specify the device categorization object name to associate with this WIPS policy.

Examples

nx9500-6C8809(config-wips-policy-test)#use device-categorization test

nx9500-6C8809(config-wips-policy-test)#show context
wips-policy test
 event excessive 80211-replay-check-failure threshold-client 10 threshold-radio 99 filter-ageout 9
 no event client-anomaly wellenreiter filter-ageout 99
 signature test
  interference-event
  bssid 11-22-33-44-55-66
  dst-mac 55-66-77-88-99-00
  frame-type reassoc
  filter-ageout 8
  threshold-client 88
  payload 1 pattern test offset 1
 ap-detection-ageout 50
 ap-detection-wait-time 15
 use device-categorization test
nx9500-6C8809(config-wips-policy-test)#

Related Commands


no (wips-policy-config-mode-command)	Disables the use of a device categorization policy with a WIPS policy