aggregate (bgp-router-config)
Creates and configures an aggregate address entry in the BGP
database
Supported in the following platforms:
- Service Platforms — NX9500, NX9600
Syntax
aggregate-address <IP/M> {as-set {summary-only}|summary-only}
Parameters
aggregate-address <IP/M> {as-set {summary-only}|summary-only}
| aggregate-address <IP/M> |
Specify the aggregate IP address and mask |
| as-set {summary-only} |
Optional. Summarizes the AS_PATH attributes of the
individual routes aggregated
- summary-only – Optional. Filters more specific routes from updates
|
Examples
nx9500-6C8809(config-device B4-C7-99-6C-88-09-router-bgp)#aggregate-address 192.168.13.10/32 as-set summary-only
nx9500-6C8809(config-device B4-C7-99-6C-88-09-router-bgp)#show context
router bgp
bgp enable
asn 1
aggregate-address 192.168.13.10/32 as-set summary-only
bgp neighbor 192.168.13.199
remote-as 1
use route-map UnSupMap_01 in
bgp neighbor 192.168.13.99
remote-as 199
timers connect 10
timers 20 40
maximum-prefix 9999 80 restart 50
bgp neighbor 1.1.1.1
remote-as 2
timers connect 10
timers 20 40
maximum-prefix 1000000
bgp-route-limit num-routes 10 reset-time 360
nx9500-6C8809(config-device B4-C7-99-6C-88-09-router-bgp)#
