AP410i/e Specifications

AP410i/e is a tri-radio, indoor model 802.11ax access point. The “i” in AP410i indicates that the access point comes with internal antennas and the “e” indicates that it comes with external antenna connectors. The access point features a dual-band radio, two band-locked radios, six WiFi internal or external antennas, and one BLE antenna.

Note

The AP410i/e requires a minimum base firmware of WiNG 7.3.0.

Radios: Three 802.11ax radios
- One 2X2 2.4 GHz radio
- One 4X4 5 GHz radio
- One 2X2 2.4 GHz and 5 GHz radio
One 2.4 GHz IoT radio
Console Port: RJ45.
Two Ethernet Ports:
- GE1 - 10/100/1000/2500/5000 Mbps auto-negotiation Ethernet port, RJ45, with PoE In
- GE2 - One multi-rate GE/2.5 GE Ethernet port
LEDs: Seven – all LEDs will be powered on during reset and will connect to general purpose input/ output (GPIO) pins
One Reset button
One Kensington lock
One safety hanger provision
One USB 2.0 type A connector
Power: PoE 802.3at
Antennas:
- AP410i: Six WiFi internal antennas and one BLE internal antenna
- AP410e: Six RP-SMA external antenna ports and one BLE RP-SMA antenna