no (bgp-neighbor-config)

Removes this BGP neighbor‘s settings, or reverts them back to default

Supported in the following platforms:

Syntax

no <PARAMETER>

Parameters

no <PARAMETER>
no <PARAMETER> Specify the parameter details to remove or revert to default

Examples

The following example shows the neighbor 192.168.13.99 settings before the ‘no‘ commands are executed:

nx9500-6C8809(config-profile testNX9000-router-bgp-neighbor-192.168.13.99)#show context
  bgp neighbor 192.168.13.99
   advertisement-interval 100
   allowas-in 10
   attribute-unchanged as-path
   capability orf prefix-list both
   default-originate
   description neighbor "This neighbor is an external AS neighbor"
   disable-connected-check
   dont-capability-negotiate
   ebgp-multihop 20
   enforce-multihop
   local-as 20 no-prepend
   maximum-prefix 400 50 warning-only
   next-hop-self
nx9500-6C8809(config-profile testNX9000-router-bgp-neighbor-192.168.13.99)#
nx9500-6C8809(config-profile testNX9000-router-bgp-neighbor-192.168.13.99)#no advertisement-interval
nx9500-6C8809(config-profile testNX9000-router-bgp-neighbor-192.168.13.99)#no disable-connected-check
nx9500-6C8809(config-profile testNX9000-router-bgp-neighbor-192.168.13.99)#no default-originate
nx9500-6C8809(config-profile testNX9000-router-bgp-neighbor-192.168.13.99)#no local-as
nx9500-6C8809(config-profile testNX9000-router-bgp-neighbor-192.168.13.99)#show
context
  bgp neighbor 192.168.13.99
   allowas-in 10
   attribute-unchanged as-path
   capability orf prefix-list both
   description neighbor "This neighbor is an external AS neighbor"
   dont-capability-negotiate
   ebgp-multihop 20
   maximum-prefix 400 50 warning-only
   next-hop-self
nx9500-6C8809(config-profile testNX9000-router-bgp-neighbor-192.168.13.99)#
9037762-01 Rev AA