root-select (meshpoint-device-config)

Configures this mesh-point device as the cost. root

Supported in the following platforms:

Access Points — AP 6522, AP 6532, AP 6562, AP 7161, AP 7502, AP-7522, AP 7532, AP-7562, AP7632, AP7662, AP-8432, AP-8533

Syntax

root-select cost-root

Parameters

root-select cost-root


root-select cost-root	Configures this meshpoint device as the cost root. This is necessary for dynamic root selection process. Select this option to set the meshpoint as the cost root for meshpoint root selection. This setting is disabled by default.

Examples

ap8432-070235(config-device-74-67-F7-07-02-35-meshpoint-test)#root-select cost-root

ap8432-070235(config-device-74-67-F7-07-02-35-meshpoint-test)#show context
 meshpoint-device test
  root select-method auto-mint
  root-select cost-root
ap8432-070235(config-device-74-67-F7-07-02-35-meshpoint-test)#

Related Commands


no (meshpoint-device-config)	Removes this mesh-point device as the cost. root.