description
bridge
Configures this extended VLAN‘s description
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Parameters
description <WORD>
| description
<WORD> |
Configures a description for this VLAN bridge
- <WORD> – Enter a description. The description should be unique to the VLAN‘s specific configuration to help differentiate it from other VLANs with similar configurations.
|
Example
nx9500-6C8809(config-profile-default-rfs4000-bridge-vlan-1)#description “This is a description for the bridged VLAN”
nx9500-6C8809(config-profile-default-rfs4000-bridge-vlan-1)#show context
bridge vlan 1
description "This is a description for the bridged VLAN"
bridging-mode isolated-tunnel
ip igmp snooping
ip igmp snooping querier
nx9500-6C8809(config-profile-default-rfs4000-bridge-vlan-1)#
Related Commands
| no |
Removes VLAN‘s description |
