load

Loads default (built-in, system-provided) client identity fingerprints. This option is enabled by default.

The WiNG software provides some built-in client identity fingerprints that are automatically loaded when the client identity group if applied to a device (either directly or through the profile).

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

load default-fingerprints

Parameters

load default-fingerprints


load default-fingerprints	Loads client identity default fingerprints. This option is enabled by default.

Examples

The auto-load default fingerprints option is enabled by default, as shown in the following example:

nx9500-6C874D(config-client-identity-group-test)#show context
client-identity-group test
 load default-fingerprints
nx9500-6C874D(config-client-identity-group-test)#

In scenarios where only customized client identities are to be applied, use the no > load > default-fingerprints command to disable auto-loading of default device fingerprints.

nx9500-6C874D(config-client-identity-group-test)#no load default-fingerprints

nx9500-6C874D(config-client-identity-group-test)#show context
client-identity-group test
 no load default-fingerprints
nx9500-6C874D(config-client-identity-group-test)#

Note

Use the service > show > client-identity-defaults command to view default client identity fingerprints.

nx9500-6C874D#service show client-identity-defaults
client-identity Android-2-1
 dhcp 1 message-type request option 55 exact hexstring 0103061c21333a3b79
 dhcp 6 message-type request option 60 exact ascii dhcpcd\ 4.0.1
client-identity Android-2-2
 dhcp 1 message-type request option 55 exact hexstring 01792103061c333a3b
 dhcp 6 message-type request option 60 exact ascii dhcpcd\ 4.0.15
client-identity Android-2-3
 dhcp 3 message-type request option 55 exact hexstring 01792103061c333a3b
 dhcp 6 message-type request option 60 exact ascii dhcpcd\ 4.0.15
 dhcp 1 message-type request option-codes exact hexstring 353d32393c37
 dhcp 2 message-type request option-codes exact hexstring 353d3236393c37
 dhcp 10 message-type request option-codes exact hexstring 353d3236393c0c37
--More--
nx9500-6C874D#

Related Commands


no	Disables automatic loading of default client identity fingerprints