remote-session-id

Configures the manual session‘s remote ID. This ID is passed in the establishment of the tunnel session.

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

remote-session-id <1-4294967295>

Parameters

remote-session-id <1-4294967295>


remote-session-id <1-4294967295>	Configures this manual session‘s remote ID <1-4294967295> – Specify a value from 1 - 4294967295.

Examples

nx9500-6C8809(config-profile default-nx5500-l2tpv3-manual-session-test)#remote-session-id 200

nx9500-6C8809(config-profile default-nx5500-l2tpv3-manual-session-test)#show context
 l2tpv3 manual-session test
  local-ip-address 1.2.3.4
  peer ip-address 5.6.7.8 udp port 150
  local-session-id 1
  remote-session-id 200
  remote-cookie size 8 400 700
nx9500-6C8809(config-profile default-nx5500-l2tpv3-manual-session-test)#

Related Commands


no	Removes the manual session's remote ID