AP5010 Specifications

The AP5010 is a high-performance 802.11ax Wi-Fi 6E, 6 GHz, 5 GHz band, and 2.4 GHz band access point designed for high-density indoor environments. The access point supports IEEE 802.11ax Orthogonal Frequency-Division Multiple Access (OFDMA) multi-user access.

The access point can be installed indoors on a ceiling rail, on a nonstandard ceiling, or on a wall.

• One multicolor LED status light
• One light sensor located at the top of the device
• Two Ethernet ports - Eth0 and Eth1
  Ethernet ports (Eth0 and Eth1) automatically negotiate full-duplex connections with the connecting device.

  • Eth0 is 5/2.5/1GE/100 with Power over Ethernet (PoE)
  • Eth1 is 2.5/1GE/100 with PoE power sourcing equipment (PSE)

  These ports are auto-sensing and adjust to straight-through and crossover standard Cat6 or better Ethernet cables automatically. The access point receives power through an Ethernet connection to the ETH0 port from PSE that is compatible with the 802.3bt and 802.3at standards.
• One USB port

  Use the USB port to connect USB-based beacons such as iBeacon and Internet of Things (IoT) devices. Remove the protective cover to access the USB port.

• One micro USB console port
• One reset button
• One Kensington lock

  The best practice is to use Kensington locks for locking the device.