proxy-nd-mode
Configures the proxy ND mode for this
WLAN member clients as either strict or dynamic. ND proxy is used in IPv6 to provide
reachability by allowing a client to act as proxy. Proxy certificate signing can be done
either dynamically (requiring exchanges of identity and authorization information) or
statically when the network topology is defined.
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
proxy-nd-mode [dynamic|strict]
Parameters
proxy-nd-mode [dynamic|strict]
| proxy-nd-mode [dynamic|strict] |
Configures the proxy ND mode for this WLAN member clients. The options are:
dynamic and strict
- dynamic – Forwards ND request
to wireless for which a response could not be proxied. This is the default
value.
- strict – Does not forward ND
requests to the wireless side
|
Examples
nx9500-6C8809(config-wlan-test)#proxy-nd-mode strict
nx9500-6C8809(config-wlan-test)#show context
wlan test
ssid test
bridging-mode tunnel
encryption-type none
authentication-type none
wpa-wpa2 server-only-authentication
proxy-nd-mode strict
opendns device-id 44-55-66
nx9500-6C8809(config-wlan-test)#
