no (rtl-server-policy-config-mode-commands)

Removes the locationing server‘s URL configuration

Supported in the following platforms:

Access Points — AP410i/e AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600
Virtual Platforms — CX9000, VX9000

Syntax

no <URL>

Parameters

no <URL>


no <URL>	Removes the RTL server‘s URL

Examples

The following example displays the RTL server policy ‘test‘ settings before the ‘no‘ command is executed:

nx9500-6C8809(config-rtl-server-policy-test)#show context
rtl-server-policy test
 url https://testrtlsever.com
nx9500-6C8809(config-rtl-server-policy-test)#

nx9500-6C8809(config-rtl-server-policy-test)#no url

The following example displays the RTL server policy ‘test‘ settings after the ‘no‘ command is executed:

nx9500-6C8809(config-rtl-server-policy-test)#show context
rtl-server-policy test
nx9500-6C8809(config-rtl-server-policy-test)#