configuration-persistence
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
configuration-persistence {auto|secure}
Parameters
configuration-persistence {auto|secure}
| auto |
Optional.
Assigns default value based on the device type |
| secure |
Optional.
Ensures parts of a file that contain security information are not written
during a reload |
Example
nx9500-6C8809(config-profile-default-ap8533)#configuration-persistence secure
nx9500-6C8809(config-profile-default-ap8533)#show context
profile ap8533 default-ap8533
bridge vlan 1
no edge-vlan
ip igmp snooping
no ip igmp snooping unknown-multicast-fwd
no ip igmp snooping mrouter learn pim-dvmrp
autoinstall configuration
autoinstall firmware
..........................................................................
cluster name cluster1
cluster member ip 1.2.3.4 level 2
cluster member ip 172.16.10.3
cluster member vlan 4094
cluster handle-stp
cluster force-configured-state
holdtime 1000
timer 900
configuration-persistence secure
nx9500-6C8809(config-profile-default-ap8533)#
Related Commands
| no |
Disables automatic write up of startup configuration file |
