dns-server (dhcpv6-pool-config)
Configures this DHCPv6 pool‘s DNS server. The DNS server supports all
clients connected to networks supported by the DHCPv6 server.
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
dns-server <IPv6> {<SECONDARY-IPv6>}
Parameters
dns-server <IPv6> {<SECONDARY-IPv6>}
| <IPv6> |
Configures the primary DNS server‘s IPv6 address
- <IPv6> – Specify the DNS server‘s IPv6 address (the server associated with
this DHCP pool).
|
| <SECONDARY-IPv6> |
Configures the secondary DNS server‘s IPv6 address
- <SECONDARY-IPv6> – Specify the secondary DNS server‘s IPv6 address (the
server associated with this DHCP pool).
|
Examples
nx9500-6C8809(config-dhcpv6-server-policy-test-pool-DHCPv6Pool1)#dns-server 2002::1
nx9500-6C8809(config-dhcpv6-server-policy-test-pool-DHCPv6Pool1)#show context
dhcpv6-pool DHCPv6Pool1
dns-server 2002::1
nx9500-6C8809(config-dhcpv6-server-policy-test-pool-DHCPv6Pool1)#
